DTF Image Transfer Application Instructions

HOME IRON INSTRUCTIONS

  1. Protect surface your ironing on with a heat mat or towel etc
  2. Place you t-shirt or fabric into place and iron for 5 seconds to remove creases
  3. Place your DTF Image Transfer into position
  4. Turn off your steam function, empty water from iron. Set Iron to Cotton 130-150°C
  5. Iron with firm pressure for 10-15 seconds
  6. Wait until the transfer is cool and slowly peel off the clear film
  7. If the transfer is not fully adhered then please repeat step 5
  8. Congratulations your transfer is complete

 

HEAT PRESS INSTRUCTIONS

  1. Pre-heat your heat press at 140-150°C
  2. Place you t-shirt or fabric into place and press for 5 seconds to remove creases
  3. Place your DTF Image Transfer into position
  4. Press with firm pressure for 10-15 seconds
  5. Wait until the transfer is cool and slowly peel off the clear film
  6. If the transfer is not fully adhered then please repeat step 5
  7. Congratulations your transfer is complete